Showing posts with label 608ZZ. Show all posts
Showing posts with label 608ZZ. Show all posts

Friday, 20 November 2015

Bearings

Pile of LM8UU


Both LM8UU and 608ZZ bearings arrived and I have installed one bearing so far.  Y-axis idler was the only one that does not require 8mm shafts to be cut and ready. I went through 608ZZ bearings and selected the one that did not feel like having gravel inside. No issues here, except I didn't have M8 bolt and nut so a quick run to local hardware store was required. I might replace this with smaller bearing as in Toolson design.

Y-axis idler


Thursday, 29 October 2015

Bearings, belts and pulleys

I have ordered bunch of bearings, GT2 belt and pulleys from China. The quality of those bearings will be a mystery but I have an idea to replace some of the LM8UU bearings with printed or IGUS bushings later on.

The most difficult part to find is a good set of round smooth linear rods. I would like them to be chromed stainless steel and preferably correct length. I think Y axis of P3Steel can accommodate longer than specified rods but all the others should be spot on. I don't really like the idea of cutting 8mm chromed bar with Dremel.