Wiring was pretty easy to get done but it looks pretty messy. I have to wrap wires somehow together and think some clever routings. It is important to make sure cables have enough length for the whole movement of the axis. I almost snapped the end stop of from X-axis because I didn't remember it moving higher as the Z increases.
While I was testing the cabling I could not get extruder stepper working. I thought I had burnt driver but in the end it was the 'cold extrusion prevention' feature of the firmware. Simple fix this time. Also, some of the axis were moving to wrong direction but I fixed that in the firmware configuration.
No comments:
Post a Comment